20 May 2021

13 October 2016

Beware of Fake Recruiters - Few things you must know before appying any Jobs

Share and Help your friends.

Here are the few points you need to know before applying for any jobs.


  • Confirm about the Job Offer/ Interview Call Letter by contacting HR or from the People who work at same company.
  • Medium/ Large scale industries/ Limited Companies will have their own domain and they Do not send mails from gmail OR yahoo. Company mail id must be in the form of name@company_name.com (example hr@hcl.com)
  • If you receive any suspicious mail from company_name@gmail.com (example hrhcl@gmail.com), never respond to such mails.
  • Before applying for job, confirm the company details in GOOGLE SEARCH.
  • There are fake recruiters who will call and asks you to deposit the cash to their account.
  • Don’t respond to any mails where money has been asked. Those mails must be REPORTED as SPAM. Companies will not ask for money as processing charge or Visa charge.
  • Job portals like Naukari.com, Monsterindia.com, Timesjob.com are trying to provide their best services but still the fake recruiters making use of it. So better check the recruiter details before you apply for Job.
  • Beware of Online Fake Scams who promise you to provide job in big companies like Hyundai, TATA Motors, Infosys, HCL, Maruthi Suzuki etc..
  • Always upload your resume on Company official website.
  • Do not pay for Backdoor Entry Job consultancies who assure you of getting job in TOP OEMs. Most of them are fake and if the company gets to know about your background you will be fired out from the company.

 

Share and Help your friends.


22 September 2016

Mechanical Interview Questions with answers for Freshers / Experienced -15


What is mechanical efficiency?
The numerical representation that measures the effectiveness of a machine.



The "Machine Efficiency"
- In every machine little work is wasted while trying to overcome the force of friction.
- To calculate the mechanical efficiency, divide the output work by the input work, then you have to multiply it by 100.



Formula:
Mechanical Efficiency = Output Force/ Input Force x 100



Difference between Mechanical Efficiency and Mechanical Advantage:
Mechanical advantage is the number of times a machine increases the input force while mechanical efficiency is the ratio of output work to input work.







21 September 2016

Interview Questions with Asnswers on Mechanical CAD and Engineering Drawing -14

Q: What is a Drawing?
Ans : It is a graphical representation of a real thing to define and specify the shape and size of a particular object by means of lines.



Q: What is Engineering Drawing?
Ans: A drawing which is worked out an engineer for the engineering purpose is known as Engineering Drawing.



Q : What is a sketching?
Ans : This is freehand expression of the graphic language.



Q: What are the file formats used in design?
Ans:
- There is a use of native format like .dwg for the AutoCAD and it provides an interchangeable format.
- The file format that is interchangeable has the extension as DXF and it provides the data operability.
- AutoCAD includes the .dwg format and provides the support as well. It provides a way to use the files that are active.
- It provides a way to estimate the total number of active .dwg files that can be made in collaboration with other files.
- It provides languages that can be used and the localization part of the software can be modified to meet the requirements.


Q: What is the procedure to remove the empty layers?
Ans:
- The empty layers can be removed from the drawing by using the all objects residing at once place.
- The references of the layers are also removed so that it appears to be empty and can easily be created.
- If the layer is empty then the PURGE will not be able to remove the layers from the drawing.
- The layer can be made frozen on the viewport that is visible to the object and provide the definition of the object too.
- The removing of the layer is possible due to the drawing that can be made using the EXPORT command and the result can be created in the DXF file.



For More "CAD, CNC And Mechatronics" Interview Q&A Click Here.

For All Interview Questions Click Here.





11 April 2014

Interview Questions with answers on IC Engine for Freshers/ Experienced -13

Q.: what are the advantages of lubrication in IC Engine?
Ans.:  following are the advantages of lubrication in IC Engine:
►it reduces the wear and tear of the moving parts.
►it damps down the vibration of the engine.
►it cleans the moving parts.
►it makes the piston gas tight.



Q: Why have eight cylinders in an engine? Why not have one big cylinder of the same displacement of the eight cylinders instead?
Ans.: There are a couple of reasons why a big 4.0-liter engine has eight half-liter cylinders rather than one big 4-liter cylinder. The main reason is smoothness. A V-8 engine is much smoother because it has eight evenly spaced explosions instead of one big explosion. Another reason is starting torque. When you start a V-8 engine, you are only driving two cylinders (1 liter) through their compression strokes, but with one big cylinder you would have to compress 4 liters instead.

IC interview


Q: What causes white smoke in two stroke locomotive engines?
Ans.: That is because of engine running too lean mixture (lack of fuel). This condition will lead to overheating and failure of the engine.



Q: Why efficiency of gas turbines is lower compared to I.C. Engines?
Ans.:  In gas turbines, 70% of the output of gas turbine is consumed by compressor. I.C. engines have much lower auxiliary consumption. Further combustion temperature of I.C. engines is much higher compared to gas turbine.



Q: What do you understand by timed cylinder lubrication?
Ans.:  For effective lubrication, lubrication oil needs to be injected between two piston rings when piston is at bottom of stroke so that piston rides in oil during upward movement. This way lot of lubrication oil can be saved and used properly.



Q: In some engines glycerin is used in place of water for cooling of engine. Why?
Ans.:  Glycerin has boiling point of 90°C which increases its heat carrying capacity. Thus weight of coolant gets reduced and smaller radiator can be used.



Q: Why we do not use same technology to start both SI /CI engine
Ans.: The S.I. or spark ignition engine uses petrol as a fuel and the C.I. or compression ignition engine uses diesel as a fuel. Both the fuels has different compression ratio.
In SI engine the compression ratio is 8-12:1.
In CI engine the compression ratio is 16-22:1.
So in case of SI engine, the compression ratio is not sufficient for fuel to burn so a spark plug is used, whereas in ci engine, the compression ratio is so high that due to its internal heat the fuel is combusted so there is no need for a spark plug. So the technology used in SI engine is different from CI engine.



Q: Which has more efficiency: Diesel engine or Petrol engines?
Ans.: Diesel engine has the better efficiency out of two.



Q: What is the position of Piston Ring?
Ans.:     In 180 degree angle the Top ring, Second ring and Oil ring are fixed. Position the ring approximately 1 inch gap below the neck.

IC interview



For all Interview Questions Click Here




05 April 2014

Interview Questions with answers on Production Engineering for Experienced/ Freshers-12

Q: What is the difference between Specification, Codes, and Standards?
Ans.:
Specification is describing properties of any type of materials.
Code is procedure of acceptance and rejection criteria.
Standard is accepted values and compare other with it.



Q: What are the Difference between the 3 jaw Chuck and 4 jaw chuck??
Ans.:

3 jaw chuck 
4 jaw chuck
Work pieces cannot be set for eccentric turning
Work pieces can be set for eccentric turning.
Mainly used to hold circular, oval jobs.
Used to hold circular, oval jobs, rectangle and square jobs
Depth of cut given is comparatively less.
More depth of cut can be given.
Less gripping power
More gripping power
3 jaws cannot be adjusted individually
4 jaws can be adjust individually.
Setting up of work is easy
Difficult.
Heavier jobs cannot be turned.
Heavier jobs cannot be turned.

 3 jaw Chuck and 4 jaw chuck





Q: What is difference between Welding and Brazing?
Ans.:
In Welding concentrated heat (high temperature) is applied at the joint of metal and fuse together.

In Brazing involves significantly lower temperatures and does not entail the melting of base metals. Instead, a filler metal is melted and forced to flow into the joint through capillary action.




Q: What is the least-count of Vernier Caliper and Screw Gauge??
Ans.:
Vernier Caliper:  
LC = (Value of 1 Main Scale Division) / (Total number of vernier scale divisions)
In most of the Vernier Caliper’s, LC= 0.1 mm = [1mm / 10 divisions]

Screw Gauge:
Least count = (Value of 1 pitch scale reading)/ (Total number of head scale divisions)
In most of the Screw Gauge’s, LC= [1mm / 100 divisions] = 0.01 mm

Screw Gauge Least Count

Vernier Caliper:




Q: What are the main difference between Iron and Mild Steel?
Ans.:

Cast iron
Steel
Cast iron is a hard grey metal.
Steel is an alloy or iron
Cast iron is cheaper than steel
Costlier.
CI has a low melting point with the ability to mold easily.
Steel is mild and harder to cast, and loses viscosity.
Cast iron is used for making manhole covers, piping and guttering.
Steel is fabricated to make tools, structures, knives etc.

02 April 2014

G Codes and M Codes with simple definition for Experienced/ Freshers



Here is the list of all G codes and M Codes with its simple definition: 



G-Codes simple definition
G00  
Rapid traverse
G01    
Linear interpolation with feed rate
G02 
Circular interpolation (clockwise)
G03   
Circular interpolation (counter clockwise)
G2/G3  
Helical interpolation
G04    
Dwell time in milliseconds
G05   
 Spline definition
G06   
 Spline interpolation
G07    
Tangential circular interpolation / Helix interpolation / Polygon interpolation / Feed rate interpolation
G08
Ramping function at block transition / Look ahead "off"
G09 
No ramping function at block transition / Look ahead "on"
G10   
Stop dynamic block preprocessing
G11    
Stop interpolation during block preprocessing
G12    
Circular interpolation (CW) with radius
G13    
Circular interpolation (CCW) with radius
G14   
Polar coordinate programming, absolute
G15   
Polar coordinate programming, relative
G16
Definition of the pole point of the polar coordinate system
G17    
Selection of the X, Y plane
G18  
Selection of the Z, X plane
G19  
Selection of the Y, Z plane
G20   
Selection of a freely definable plane
G21 
Parallel axes "on"
G22    
Parallel axes "off"
G24    
Safe zone programming; lower limit values
G25  
Safe zone programming; upper limit values
G26    
Safe zone programming "off"
G27  
Safe zone programming "on"
G33   
Thread cutting with constant pitch
G34   
Thread cutting with dynamic pitch
G35    
Oscillation configuration
G38   
Mirror imaging "on"
G39    
Mirror imaging "off"
G40 
Path compensations "off"
G41   
Path compensation left of the work piece contour
G42   
Path compensation right of the work piece contour
G43
Path compensation left of the work piece contour with altered approach
G44   
 Path compensation right of the work piece contour with altered approach
G50  
Scaling
G51    
Part rotation; programming in degrees
G52 
Part rotation; programming in radians
G53   
Zero offset off
G54  
Zero offset #1
G55  
Zero offset #2
G56  
Zero offset #3
G57   
Zero offset #4
G58 
Zero offset #5
G59 
Zero offset #6
G63 
Feed / spindle override not active
G66  
Feed / spindle override active
G70  
Inch format active
G71 
Metric format active
G72  
Interpolation with precision stop "off"
G73   
Interpolation with precision stop "on"
G74 
Move to home position
G75    
Curvature function activation
G76  
Curvature acceleration limit
G78   
Normalcy function "on" (rotational axis orientation)
G79    
Normalcy function "off"
G80 - G89
For milling applications:
G80   
Canned cycle "off"
G81
Drilling to final depth canned cycle
G82   
Spot facing with dwell time canned cycle
G83   
Deep hole drilling canned cycle
G84 
Tapping or Thread cutting with balanced chuck canned cycle
G85   
Reaming canned cycle
G86   
Boring canned cycle
G87  
Reaming with measuring stop canned cycle
G88   
Boring with spindle stop canned cycle
G89  
Boring with intermediate stop canned cycle
G81 - G88
For cylindrical grinding applications:
G81   
Reciprocation without plunge
G82  
Incremental face grinding
G83   
Incremental plunge grinding
G84  
Multi-pass face grinding
G85 
Multi-pass diameter grinding
G86  
Shoulder grinding
G87    
Shoulder grinding with face plunge
G88 
Shoulder grinding with diameter plunge
G90   
Absolute programming
G91 
Incremental programming
G92 
Position preset
G93  
Constant tool circumference velocity "on" (grinding wheel)
G94  
Feed in mm / min (or inch / min)
G95  
Feed per revolution (mm / rev or inch / rev)
G96 
Constant cutting speed "on"
G97  
Constant cutting speed "off"
G98 
Positioning axis signal to PLC
G99 
Axis offset
G100
Polar transformation "off"
G101
Polar transformation "on"
G102 
Cylinder barrel transformation "on"; Cartesian coordinate system
G103 
Cylinder barrel transformation "on," with real-time-radius compensation (RRC)
G104 
Cylinder barrel transformation with center line migration (CLM) and RRC
G105  
Polar transformation "on" with polar axis selections
G106  
Cylinder barrel transformation "on" polar-/cylinder-coordinates
G107 
Cylinder barrel transformation "on" polar-/cylinder-coordinates with RRC
G108 
Cylinder barrel transformation polar-/cylinder-coordinates with CLM and RRC
G109 
Axis transformation programming of the tool depth
G110 
Power control axis selection/channel 1
G111 
Power control pre-selection V1, F1, T1/channel 1 (Voltage, Frequency, Time)
G112 
Power control pre-selection V2, F2, T2/channel 1
G113 
Power control pre-selection V3, F3, T3/channel 1
G114 
Power control pre-selection T4/channel 1
G115  
Power control pre-selection T5/channel 1
G116 
Power control pre-selection T6/pulsing output
G117 
Power control pre-selection T7/pulsing output
G120  
Axis transformation; orientation changing of the linear interpolation rotary axis
G121  
Axis transformation; orientation change in a plane
G125 
Electronic gear box; plain teeth
G126 
Electronic gear box; helical gearing, axial
G127 
Electronic gear box; helical gearing, tangential
G128 
Electronic gear box; helical gearing, diagonal
G130
Axis transformation; programming of the type of the orientation change
G131 
Axis transformation; programming of the type of the orientation change
G132 
Axis transformation; programming of the type of the orientation change
G133 
Zero lag thread cutting "on"
G134 
Zero lag thread cutting "off"
G140  
Axis transformation; orientation designation work piece fixed coordinates
G141  
Axis transformation; orientation designation active coordinates
G160 
ART activation
G161 
ART learning function for velocity factors "on"
G162
ART learning function deactivation
G163  
ART learning function for acceleration factors
G164  
ART learning function for acceleration changing
G165  
Command filter "on"
G166  
Command filter "off"
G170 
Digital measuring signals; block transfer with hard stop
G171  
Digital measuring signals; block transfer without hard stop
G172 
Digital measuring signals; block transfer with smooth stop
G175 
SERCOS-identification number "write"
G176
SERCOS-identification number "read"
G180  
Axis transformation "off"
G181 
Axis transformation "on" with not rotated coordinate system
G182 
Axis transformation "on" with rotated / displaced coordinate system
G183 
Axis transformation; definition of the coordinate system
G184  
Axis transformation; programming tool dimensions
G186  
Look ahead; corner acceleration; circle tolerance
G188 
Activation of the positioning axes
G190 
Diameter programming deactivation
G191 
Diameter programming "on" and display of the contact point
G192 
Diameter programming; only display contact point diameter
G193 
Diameter programming; only display contact point actual axes center point
G200  
Corner smoothing "off"
G201 
Corner smoothing "on" with defined radius
G202 
Corner smoothing "on" with defined corner tolerance
G203 
Corner smoothing with defined radius up to maximum tolerance
G210
Power control axis selection/Channel 2
G211  
Power control pre-selection V1, F1, T1/Channel 2
G212  
Power control pre-selection V2, F2, T2/Channel 2
G213  
Power control pre-selection V3, F3, T3/Channel 2
G214 
Power control pre-selection T4/Channel 2
G215 
Power control pre-selection T5/Channel 2
G216  
Power control pre-selection T6/pulsing output/Channel 2
G217  
Power control pre-selection T7/pulsing output/Channel 2
G220  
Angled wheel transformation "off"
G221
Angled wheel transformation "on"
G222  
Angled wheel transformation "on" but angled wheel moves before others
G223  
Angled wheel transformation "on" but angled wheel moves after others
G265 
Distance regulation – axis selection
G270 
Turning finishing cycle
G271 
Stock removal in turning
G272 
Stock removal in facing
G274 
Peck finishing cycle
G275 
Outer diameter / internal diameter turning cycle
G276  
Multiple pass threading cycle
G310  
Power control axes selection /channel 3
G311 
Power control pre-selection V1, F1, T1/channel 3
G312
Power control pre-selection V2, F2, T2/channel 3
G313 
Power control pre-selection V3, F3, T3/channel 3
G314 
Power control pre-selection T4/channel 3
G315  
Power control pre-selection T5/channel 3
G316 
Power control pre-selection T6/pulsing output/Channel 3
G317 
Power control pre-selection T7/pulsing output/Channel 3




M codes simple definition:
M00   
Unconditional stop
M01   
Conditional stop
M02    
End of program
M03    
Spindle clockwise
M04    
Spindle counterclockwise
M05    
Spindle stop
M06    
Tool change (see Note below)
M19    
Spindle orientation
M20    
Start oscillation (configured by G35)
M21    
End oscillation
M30    
End of program
M40    
Automatic spindle gear range selection
M41    
Spindle gear transmission step 1
M42    
Spindle gear transmission step 2
M43    
Spindle gear transmission step 3
M44    
Spindle gear transmission step 4
M45    
Spindle gear transmission step 5
M46    
Spindle gear transmission step 6
M70    
Spline definition, beginning and end curve 0
M71    
Spline definition, beginning tangential, end curve 0
M72    
Spline definition, beginning curve 0, end tangential
M73    
Spline definition, beginning and end tangential
M80    
Delete rest of distance using probe function, from axis measuring input
M81    
Drive On application block (resynchronize axis position via PLC signal during the block)
M101-M108  
Turn off fast output byte bit 1 (to 8)
M109  
Turn off all (8) bits in the fast output byte
M111-M118  
Turn on fast output byte bit 1 (to 8)
M121-M128  
Pulsate (on/off) fast output byte bit 1 (to 8)
M140   
Distance regulation “on” (configured by G265)
M141   
Distance regulation “off”
M150   
Delete rest of distance using probe function, for a probe input (one of 16, M151-M168)
M151-M158  
Digital input byte 1 bit 1 (to bit 8) is the active probe input
M159   
PLC cannot define the bit mask for the probe inputs
M160   
PLC can define the bit mask for the probe inputs (up to 16)
M161-M168  
Digital input byte 2 bit 1 (to bit 8) is the active probe input
M170   
Continue the block processing look ahead of the part program (cancel the M171)
M171   
Stop the block processing look ahead of the probe input part program segment (like a G10)
M200   
Activate the hand wheel operation in the automatic mode (to introduce an offset in the program)
M201-M208  
Select the axis (by number from 1 to 8) for the hand wheel operation
M209   
Activate the hand wheel operation in the automatic mode, with PLC control of the axis selection
M210   
Deactivate the hand wheel input while in the automatic mode
M211   
Deactivate this hand wheel feature and also remove the hand wheel offset (if any)
M213   
Spindle 2 clockwise
M214   
Spindle 2 counterclockwise
M215   
Spindle 2 stop
M280   
Switchable spindle/rotary axis, rotary axis on, first combination
M281   
Switchable spindle/rotary axis, rotary axis on, second combination
M290   
Switchable spindle/rotary axis, spindle enabled, first combination
M291   
Switchable spindle/rotary axis, spindle enabled, second combination

Note: Some of the above G-codes and M codes are not standard and may vary from machine to machine. Specific control features, such as laser power control, enable those optional codes.

Copyrights